Description:
7/16 DIN Feeder Connector series are screw coupling high power rating RF coaxial connectors, with characteristic of impedance 50Ω. 7/16 DIN RF Feeder Connectors have the characteristics of low power loss, low PIM, high power capacity, low VSWR and waterproof. They are used to connect feeder cables transmitting high power RF signals in broadcast and TV system, base stations, telecom network project, antenna feeders, and microwave systems.
There are two typical assembly methods for 7/16 DIN Feeder Connector: clamp and solder type.
Clamp type is mostly used in on-site project, with advantage of easy operation, no necessary for taking extra equipment.
Solder type is often used to make cable assembly in factory, comparing with solder type, it has cost advantage and good performance.
Features:
1. Low loss: effectively reduce electromagnetic wave loss during signal transmission
2. The outer shell is made of copper, electroplated with ternary alloy, and the inner conductor is silver plated to ensure signal quality and transmission stability.
3. Good structural design guarantees long service life
4. The installation structure is convenient and quick to install, which is convenient for quick installation on the construction site.
5. IP67 waterproof rating
6. Pass the 96-hour salt spray test
Technical Data:
Interface
IEC 61169-16
Electrical
Characteristic Impedance
50Ω
Frequency Range
DC-3GHz
VSWR
≤1.1
Dielectric Withstanding Voltage
≥2500V RMS,50Hz,
Dielectric Resistance
≥5000MΩ
Contact resistance
Inner conductor
outer conductor
≤1.0mΩ
≤1.0mΩ
Intermodulation
≤-150dBc
Mechanical
Durability
Mating cycles ≥500
Material and plating
Part
Material
plating
Body
Brass
Suco plating
Center conductor
Tin bronze
Ag
Insulator
PTFE
/
Other
Ni
Environmental
Temperature Range
-40¡æ¡«+85¡æ
Water tightness
IP67
RoHS
Compliant
